English
English 
| Category | Parameter | Value / Description |
|---|---|---|
| Physical Properties | Density | 1.39–1.41 g/cm³ |
| Melting Point | 220°C | |
| Molding Shrinkage | 0.35%–0.6% — Lowest shrinkage and best dimensional accuracy among the PA6GF series | |
| Saturated Water Absorption | 2.2%–2.7% at room temperature | |
| Mechanical Properties | Tensile Strength | 185–198 MPa |
| Flexural Strength | 260–285 MPa | |
| Flexural Modulus | 10,800–11,800 MPa | |
| Notched Impact Strength | 9.5–12 kJ/m² (simply supported beam) | |
| Creep & Deformation Resistance | Far exceeds GF30, making it suitable for replacing some small metal parts | |
| Heat Resistance | Heat Deflection Temperature | 225–235°C at 0.45 MPa |
| Heat Deflection Temperature | 210–218°C at 1.8 MPa | |
| Continuous Operating Temperature | 95–130°C | |
| Short-Term Peak Temperature | 220°C | |
| High-Temperature Performance | Resists softening and warping under high-temperature conditions in engine compartments | |
| Corrosion Resistance & Electrical Properties | Electrical Insulation | Excellent |
| Chemical Resistance | Resistant to engine oil, gasoline, weak acids, and lubricating greases | |
| Strong Acid Resistance | Not resistant to concentrated strong acids | |
| Environmental Compliance | Compliant with RoHS and REACH standards | |
| Wear & Friction Properties | Wear-resistant and self-lubricating with a low coefficient of friction |
Automotive Industry (Main Focus): Engine intake manifolds, cooling system housings, load-bearing engine mounts, oil pump housings, high-voltage connectors for new energy vehicles, chassis structural components, and small transmission parts (oil- and heat-resistant).
Electronics and Electrical Appliances: High-power circuit breaker bases, high-voltage terminal blocks, coil forms, industrial power tool housings, insulated power supply enclosures, thermostat bases (insulation + load-bearing).
General Machinery: Heavy-duty transmission gears, pump impellers, bearing housings, sprockets, heavy-duty instrument housings, small hydraulic valve body components.
Others: Load-bearing components for high-end fitness equipment, heavy-duty bathroom hardware, and small wear-resistant structural parts for construction machinery.
Ultra-high rigidity and ultra-low shrinkage: 35% glass fiber dense skeleton ensures minimal thermal expansion and contraction, making it the top choice for high-precision assembly parts;
High-temperature resistance and anti-aging: Thermally stabilized modification minimizes mechanical degradation during long-term high-temperature service, suitable for new energy and automotive powertrain components;
Low glass fiber exposure and easy mass production: The coupling and coating process ensures a smooth product surface with minimal exposed glass fibers, enabling stable high-volume injection molding;
Customizable specifications: Can produce versions with -40°C cold resistance and toughening, V0 flame retardancy, low warpage, and high-flow specialized modifications.
Barrel temperature: 250–278°C
Nozzle temperature: 245–265°C
Mold temperature: 80–100°C
Dry the raw material at 90–110°C for 4–7 hours to remove moisture and prevent defects such as stringing, bubbles, and delamination during injection molding.
